Gain from the processing of otherwise unworkable grinding storage
General Request Form
Please fill out the form below to request details on our products.
Environmental News
1st August 2010
We are now able to offer the supply of Briquetting machines suitable for handling Aluminium swarf produced from either
turning/machining operations.
- Profits from the sale of compacted swarf, increase income from scrap by converting chips to briquettes.
- 90-95% of coolant residue extracted from swarf.
- Massive reductions in storage of Aluminium swarf.
- Can be managed in a dedicated area within the building, not exposing Aluminium to the elements.
- Reduce labour and material handling expenses by reducing scrap volume.
- Reduce potential environmental liabilities for hazardous waste disposal.
- Profit from the sale of pressed cuts and chips (briquettes).
- Decrease in material losses when melting the briquettes instead of chips.
- Recovering a significant amount of cutting fluid.
- Decrease in transport and storage charges by reduction of the volume of chips.
Gain from the processing of otherwise unworkable grinding storage. One consideration that is certainly worth pointing out is the storage of hazardous waste. If the Aluminium is in a skip outside and exposed to the elements, it does pose the risk of any oil/coolant residue that is present on the swarf is washed off and may leak and contaminate the surrounding area. With the supply of a briquetter, this will address the problem of the residue as it will be squeezed out of the swarf during the compression process and transferred into a suitable collecting receptacle (IBC).
